Bugle madaxa is-qodista

Details Product Dabada daloolista Countersunk waa xidhe-ujeedo badan oo isku daraa qodista, tuubada iyo xidhitaanka hawlaha, si gaar ah loogu talagalay rakibo hufan. Qaab dhismeedkeeda dabada dalool ee gaarka ah waxa ay awood u siinaysa in ay iskeed wax ugu qodato birta, alwaax ama agab isku dhafan iyada oo aan loo baahnayn Dr-ka hore

Codsi dir



Sharaxaada

Calaamadeeye

Faahfaahinta Alaabta

Daboolida Countersunk waa xidhe ujeedo badan leh oo isku daraysa qodista, tuubada iyo xidhidhiyaha, oo si gaar ah loogu talagalay rakibid hufan. Qaab dhismeedkeeda dabada dalool ee gaarka ah waxa ay awood u siinaysa in ay iskeed wax ugu qodato biraha, alwaaxyada ama agabka isku dhafan iyada oo aan loo baahnayn qodis ka hor. Dhanka kale, naqshadeynta madaxa countersunk waxay hubisaa in madaxu uu la socdo dusha sare ka dib marka la rakibo, taas oo labadaba si fiican u roon oo ka fogaanaysa soo-baxa.
Tilmaamaha Alaabta
1.Drill design dabada:
Dabada waxay ku qalabaysan tahay caarada laydhka, kaas oo si toos ah u qodaya oo taabsan kara, wakhtiga iyo hababka kaydinaya.
Waxaa lagu dabaqi karaa agabka sida birta khafiifka ah, aluminium alloys, iyo taarikada caagga ah (dhumucyada caadiga ah waxay u dhexeeyaan 0.5 ilaa 6mm).
2. Madax go'ay:

Madaxa conical (oo leh xagal 82° ama 90°) ayaa lagu daaweeyaa oogada alaabta si loo yareeyo soo bixista loogana fogaado khatarta xagashada.
Waa in lala isticmaalo godadka countersunk ama maaddooyinka leh awoodda is-midida ee xooggan.
3. dunta is-taabashada:
Birta kaarboon-adag-sare ama walxaha birta aan-ka-soo-baxa (sida SCM435, 304/316 birta-la'aanta), oo leh adkaanta HRC45-55 daaweynta kulaylka ka dib.
Naqshadaynta duntu waxay hubisaa xoogga qaniinyada sare iyo waxqabadka dabacsanaanta.
4. Daaweynta dusha sare:
Galvanizing (zinc/midabka zinc cad), Dacromet, fosfatinta, iwm., si kor loogu qaado ka-hortagga daxalka iyo xidhashada caabbinta.
5. Habka wadista:
- Afyare iskutallaab ah (PH2/PHD), Hex Socket ama nooca boosaska isku dhafan, oo ku habboon aaladaha korantada ama kaashawiito gacanta.
Halbeegyada qeexida
- Cabirrada guud: Dhexroorka (Φ3.5mm-Φ6.0mm), Dhererka (10mm-100mm).
- Heerka caadiga ah: U hoggaansan DIN 7504, GB/T 15856.4, ANSI/ASME B18.6.4, iwm.
Xaaladaha codsiga

- Dhismayaasha birta: midabka saqafka saxan birta, qaab dhismeedka birta, tuubooyinka hawo-qaadista.
- Beerta alwaaxa: Xidhiidhada isku-dhafan ee alwaax-birta ah ee u baahan rakibid qarsoon.
- Wax soo saarka warshadaha: armaajooyinka korantada, muraayadaha qalabka farsamada, qaybaha baabuurta.
Sharaxaada Faa'iidooyinka
- Dhisme hufan: Tirtir tillaabada qodista ka hor oo kordhi xawaaraha rakibaadda.
- Qurux badan oo siman: Naqshadaynta countersunk waxay ilaalisaa dusha sare.
- Adag oo waara: Qalab adag ayaa ku habboon xaaladaha culeyska sarreeya.
Ka taxadaritaan
Dooro qeexida dabada daloolida ee ku salaysan dhumucda alaabta.
Dhumucda xad dhaafka ah ee walaxda ayaa laga yaabaa inay sababto daal ama dillaaca dhamaadka layliga. Waxaa lagu talinayaa in horay loo qodo.

Qiyaasaha Farsamada

Magaca Alaabta:	Bugle madaxa is-qodista
Dhexroorka:	4.2mm/4.8mm
Dhererka:	13mm-100mm
Midabka:	caddaan
Qalab:	Birta kaarboon
Daaweynta dusha sare:	Galvanization
Kuwa sare waa cabbirrada alaabada Haddii aad u baahan tahay habayn aan caadi ahayn (cabir gaar ah, qalab ama daawaynta dusha sare), fadlan nala soo xidhiidh waxaanu ku siin doonaa xal shakhsiyeed.