I-pan yentloko

Imveliso yemveliso IGAMA: I-PAP yeNtloko ye-Prilling Drill Screw I-Screw Imbonakalo yomsila wentloko yindawo esebenzayo kakhulu edibanisa izinto zokuziqhelanisa, kwaye ilungele imizi, kwaye ilungele izinto ezizezinye. Uyilo lwentloko

Thumela isicelo



Inkcazo

Uphawu

Iinkcukacha zemveliso

Igama lemveliso: I-pan yentloko ye-parw
Amagqabantshintshi ngemveliso
Intloko yomsila yentloko yindawo esebenza ngokukuko edibanisa kakhulu, icofa kunye nokuzibopha imisebenzi, kwaye ilungele iintsimbi, i-Woods kunye nezinto ezihlanganisiweyo. Uyilo lwayo eyintloko: Inika indawo enkulu yokunxibelelana ukuthintela isikhafu esivela kwi-screw singene ngaphakathi kwezixhobo, kwaye incam yomsila we-Drill inokuthi ikhulise imfuneko yokuhamba, ukuphucula kakhulu ukusebenza kwenkqubo.
Iimpawu zeMveliso
1. Uyilo lwentloko:
Intloko enamachaphaza inendawo enkulu yoqhakamshelwano, ukunciphisa ilahleko yoxinzelelo kwisixhobo kwaye ilungele iipleyiti ezincinci okanye izinto ezibuthathaka.
Ezinye iimodeli ziza ne-grooves (PH2 / i-PHD) okanye i-plum yangaphakathi i-bum ikhula, ilungele izixhobo zombane okanye i-screwdrhones.
I-2. I-Drill Gilail Giail:

Incam yenziwa ngentsimbi ye-Allody (SCM435) okanye intsimbi ephezulu yecarbon, eyomelezwe ngonyango lwe-HRC4555, kwaye inokungena kwiplate yentsimbi ye-HRCE.
Ezinye zeeyilo ezihlanganisiweyo (ezinje nge-304 i-304 i-stiel yensimbi yentsimbi + yentsimbi yomsila) ithathela ingqalelo i-anti-corrosion kunye nokuntywila.
I-3. Izixhobo kunye nonyango lomphezulu:
Intsimbi engenasitali: 304/316 (i-corrosion-enganyangekiyo, ilungele indawo engaselunxwemeni okanye yekhemikhali) okanye i-410 (ubunzima obukhulu, efanelekileyo kwishishini lokwenza izixhobo).
I-Carbon Steel: IBanga le-8.8 okanye i-10.9, nge-galvanition, phosprotheting okanye unyango lwe-dacromet ukonyusa ukunganyangeki kwe-ruut.
-Ukubaleka okuyinxalenye: njenge-zinc-tin afy + ialuminium ye-epoxy polymer, idlulise uvavanyo lwe-1500 yeeyure ezili-15, kunye nenqanaba lokulwa i-Anti-Corrosion 4.
4. Iipropathi zoomatshini:
-Inamandla e-thens
Iiparamitha zenkcazo
Idayam: 3.5mm - 6.3Mm (iSt4.2, St4.8, St5.5).

- Ubude: I-10mm-100mm (ifihlakele ukuya kwi-254mm).
-Imigangatho: ihambelana ne-DIN 7504, GB / N 15856.1, njl. Njl.
Imeko yesicelo
- Ilizwe lokwakha: uphahla lwensimbi eluphahleni, udonga lweenqanawa, iiprojekthi zensimbi yensimbi.
-Imveliso yemizi-mveliso: Inxalenye ye-Auto, iiKhabhinethi zoMbane, iiphaneli zezixhobo zoomatshini.
-Ishishini lokwenza izixhobo zasekhaya: ii-quilioging zomoya, iifriji, njl njl.
IZIBONELELO NOKHUSELEKILEYO
Inzuzo:
Ukuqhuba kunye nokutshixa kugqityiwe kwinqanaba elinye, ukugcina iiyure zomsebenzi.
Uyilo lwezinto ezibonakalayo lubetha ibhalansi phakathi kwamandla kunye nokunganyangeki.
- Ukulumkela:
Impahla 410 kufuneka iphephe ukuvezwa kwexesha elide ukuya kwiindawo ezinomswakama.
Ngeepleyiti ezingaphezulu (ezinje ngentsimbi ye-carbon enkulu kune-6mm), kuyacetyiswa kwi-pre-drill

Iiparamitha zobugcisa

Igama lemveliso:	I-pan yentloko ye-pan-perw
Ububanzi:	4.2mm / 4.8mm
Ubude:	I-13mm-100mm
Umbala:	mhlophe
Izixhobo:	I-carbon yensimbi
Unyango lomphezulu:	I-galvaning
Oku kungasentla ziisayizi ze-inventri. Ukuba ufuna ukuzaliswa okungasengqiqweni (imilinganiselo ekhethekileyo, izixhobo okanye unyango lwendawo), nceda uqhagamshelane nathi kwaye siya kukubonelela ngesisombululo sobuqu.